A Janatics Double Solenoid Valve comes with two coils and no return spring; hence, it remains in its final position until the opposite coil becomes active. It is provided by VS Enterprises, located in Noida.
When an unplanned cylinder movement after a power cut could damage the product or the machine.
A coil at each end of the valve body. Janatics code: [fill from Janatics catalogue].
Material handling, indexing machines and machine doors.
Figures come from the Janatics catalogue and are confirmed for your size at quotation.
|
Parameter |
Details |
|
Product Type |
Janatics double solenoid pneumatic valve |
|
Actuation |
Two electrical solenoid coils, with one coil positioned at each end of the valve body |
|
Primary Use |
Electrically switching the direction of compressed-air flow for pneumatic cylinders and actuators |
|
Holding Action |
The valve remains in its last switched position after the energised coil is turned off |
|
Return Mechanism |
No spring return; the opposite coil must be energised to shift the valve back or change direction |
|
Suitable Applications |
Material-handling equipment, indexing machines, pneumatic machine doors, transfer systems and automated production equipment |
Need a different price point or the brand your machine was built with? These pages cover the same product type.
A few practical details to help you frame your next engineering project.
No. A short pulse on one coil shifts and holds the valve.
Avoid it, as the valve may not shift properly. PLC interlocking can be done to ensure that both coils do not engage at the same time.
It is used in the control of the motion of pneumatically driven pistons and actuators.
