VS Enterprises supplies Mercury pneumatic foot pedal valves from Noida for machines where the operator needs both hands free for the job.
Pressing the pedal shifts the valve and sends air to the cylinder or pilot circuit. Releasing it lets the spring return the valve, or, in latching types, a second press releases it. The operator keeps both hands on the workpiece.
Stitching and garment machines, small presses, riveting and marking stations, clamping fixtures and packaging tables.
Function, momentary or latching, guard needed or not, and port size.
Momentary pedals are appropriate for repetitive actions such as rivet tapping and releasing, which require a rapid action. Latching pedals keep the circuit open for longer latching or marking tasks, allowing the foot between the tasks. Match the action type to the time it takes for air to flow through each cycle.
Check the air consumption of the cylinder before installing a foot pedal valve to ensure that it corresponds with the air flow rate of the valve. Undersized valves are one of the reasons for the slow responding cylinders and for wearing out the mechanism in the long run. The pedal performs from day one as VS Enterprises can match the port size and flow rate with your current pneumatic line.
Figures come from the Mercury catalogue and are confirmed for your size at quotation.
|
Parameter |
Correct specification |
|
Product |
Mercury foot pedal valve |
|
Function |
3/2 and 5/2 directional control |
|
Action |
Momentary, with automatic spring return |
|
Guard |
To be confirmed from the exact model; do not assume a pedal guard |
|
Port size |
Model-dependent; commonly 1/8" or 1/4" BSP |
Need a different price point or the brand your machine was built with? These pages cover the same product type.
A few practical details to help you frame your next engineering project.
A guard reduces accidental operation if something drops on the pedal.
Yes, a 5/2 foot pedal valve can.
