Know the model number already? That's the fastest way to the exact Mercury valve you need. VS Enterprises stocks the full Mercury NS and NP Series from Noida — NS612, NS614, NS722, NS724, NP314H, and NP314D — each identified by the code stamped right on the valve body.
Function, port size, coil voltage — get the model number wrong and at least one of those won't fit. Send us the complete code and coil voltage straight off your existing valve's label, and the replacement we supply will be the correct one.
5/2-way, single solenoid, 1/4 inch BSP port — the core spec. Coil comes in 24 VDC or 230 VAC, and this is the model you'd reach for when operating double-acting pneumatic cylinders.
Same single-solenoid, 5/2-way action as the NS612, but with a 1/2 inch BSP port for higher air flow. 24 VDC and 230 VAC coils are both available.
A 5/3-way double-solenoid valve with a 1/4 inch BSP port. Its pressure-hold-neutral function is used where a pneumatic cylinder needs to hold its position at the centre. Coil options: 24 VDC and 230 VAC.
A 5/3-way double-solenoid, pressure-hold-neutral valve with a 1/2 inch BSP port, built for higher-flow pneumatic systems where centre-position cylinder holding is required. Coil options: 24 VDC and 230 VAC.
For high-pressure air blowing in PET blow moulding machines, this is the valve: 3/2-way, high-pressure blow type, 1/2 inch BSP port, rated up to 30 bar.
A 3/2-way dual-pressure blow solenoid valve with a 1/2 inch BSP port. Used in PET blow moulding machines where two stages of blowing pressure are required; operating pressure runs approximately 3–20 bar.
To get you the exact match quickly, please share:
Figures come from the Mercury catalogue and are confirmed for your size at quotation.
|
Model |
Function |
Port Size |
Coil Voltage |
|
NS612 |
5/2 way, single solenoid |
1/4 inch BSP |
24 VDC / 230 VAC |
|
NS614 |
5/2 way, single solenoid |
1/2 inch BSP |
24 VDC / 230 VAC |
|
NS722 |
5/3 way, double solenoid, pressure-hold neutral |
1/4 inch BSP |
24 VDC / 230 VAC |
|
NS724 |
5/3 way, double solenoid, pressure-hold neutral |
1/2 inch BSP |
24 VDC / 230 VAC |
|
NP314H |
3/2 way, high-pressure blow valve |
1/2 inch BSP |
Confirm from valve coil label |
|
NP314D |
3/2 way, dual-pressure blow valve |
1/2 inch BSP |
Confirm from valve coil label |
Need a different price point or the brand your machine was built with? These pages cover the same product type.
No matching products from other brands are currently available.
A few practical details to help you frame your next engineering project.
Yes. Share the NS612 model number, coil voltage, and a photo of the valve label — function, port size, and voltage get checked before anything ships.
We'll tell you the lead time straight up. When needed, a compatible option is suggested too, matched against function, port size, coil voltage, and what your machine actually needs.
