If you're building or maintaining a pneumatic line, the male connector is probably the fitting you reach for most. It's the standard link between a metal port and a PU tube, and getting the size and thread right the first time saves a trip back to the toolbox. VS Enterprises stocks the full Mercury male connector range out of Noida, ready for same-day dispatch across NCR and pan-India delivery.
A Mercury male connector is a straight, two-ended fitting: one end carries a male thread that screws directly into a cylinder, valve, or FRL port, and the other is a push-in socket that grips a PU tube the moment you insert it. No ferrules, no tape (in most cases), no separate coupling — just a straight, leak-resistant run from port to tube.
All sizes are in stock in Noida for immediate dispatch.
In short: anywhere a tube needs to run straight out of a port without a change in direction.
Figures come from the Mercury catalogue and are confirmed for your size at quotation.
|
Tube OD |
Thread Options |
|
4 mm |
M5, G01 (1/8" BSP), G02 (1/4" BSP) |
|
6 mm |
M5, G01 (1/8" BSP), G02 (1/4" BSP), G03 (3/8" BSP), G04 (1/2" BSP) |
|
8 mm |
G01 (1/8" BSP), G02 (1/4" BSP), G03 (3/8" BSP), G04 (1/2" BSP) |
|
10 mm |
G02 (1/4" BSP), G03 (3/8" BSP), G04 (1/2" BSP) |
|
12 mm |
G02 (1/4" BSP), G03 (3/8" BSP), G04 (1/2" BSP) |
|
16 mm |
G03 (3/8" BSP), G04 (1/2" BSP) |
Need a different price point or the brand your machine was built with? These pages cover the same product type.
A few practical details to help you frame your next engineering project.
Most push-in fittings in this range ship with sealant already on the thread, but coverage can vary by size. Confirm with our team for your specific connector before ordering.
Switch to a Mercury Male Elbow — it turns the tube 90° so you're not fighting for space around the fitting.
