Skip to main content
Mercury PU Tube and Coil for flexible compressed-air lines on machines
AUTHORISED MERCURY SUPER DISTRIBUTOR

Mercury PU Tube and Coil Dealer in Noida

Fittings only do half the job — the tube itself decides how well an air line actually performs day to day. VS Enterprises supplies Mercury PU tube and coil tube from our Noida base, available by the roll for OEM production lines and by length for maintenance and repair work.

What It Is

PU (polyurethane) tube is the standard air line for pneumatic machines, and for good reason: it stays flexible in tight routing, resists kinking under bends, and holds up to the daily wear of a working shop floor. Coil tube takes that same PU tubing and forms it into a spring-like coil, so it stretches out to give reach where it's needed and pulls itself back in when released — keeping loose hose off the floor instead of leaving it underfoot.

Colours

Mercury PU tubes and coils are available in:

  • Blue
  • Transparent
  • Yellow
  • Red
  • Black (available for anti-spark tubes)

Please share your required sizes and colours, and we’ll confirm availability from the Mercury range the same day. Mercury PU tubing is available in sizes from 4 mm to 16 mm outside diameter.

Where It's Used

  • PU tube — machine air lines running between the FRL unit, valves, and cylinders
  • Coil tube — air tools, blow guns, and any moving workstation where the line needs to stretch and retract with the operator's movement

What to Share When Ordering

  • Tube OD and ID
  • Length required, or number of rolls
  • Colour preference
  • For coil tube: working length and end fittings needed
SPECIFICATIONS

Mercury PU Tube and Coil specifications.

Figures come from the Mercury catalogue and are confirmed for your size at quotation.

Available Sizes

Product

Available Sizes

PU Tube

4×2.5, 6×4, 8×5, 8×5.5, 8×6, 10×6.5, 10×8, 12×8, 12×9, 16×12 mm

Roll Length

Standard 100 m roll

Coil Tube

6×4, 8×5, 8×5.5, 10×6.5, 12×8 mm

Working Length

3 m, 5 m, 10 m

End Fittings

Push-in end fittings available as required

05 / SAME JOB, OTHER BRANDS

The same product from other brands.

Need a different price point or the brand your machine was built with? These pages cover the same product type.

Look More

Related products.

BEFORE YOU ORDER

Good questions. Straight answers.

A few practical details to help you frame your next engineering project.

View the full FAQ

PU tubes can be significantly more flexible and thus can be easily bent around corners and through tight spaces without additional fittings. Compared to nylon tube, it is stiffer, and the rigidity is more suitable for higher-pressure or higher-temperature use where flexibility is not important in comparison with raw resistance.

Yes, as long as the colour you want is available in the size you need. Colour-coding air lines by function or by machine section makes it noticeably faster to trace a line during maintenance, rather than following the tube by hand across a busy panel.